Certificate III in Early Childhood Education & Care – CHC30113

AT A GLANCE

Kick-start your career with this entry-level course that will set you up with the foundation skills you need to succeed as an assistant childcare worker.

JOB PROSPECTS

  • Out of School Hours Care Assistant
  • Family Day Care Provider
  • Early Childhood Education and Care Assistant
  • Early Childhood Education and Care Worker

COURSE OUTCOME

STUDY OPTIONS

  • Class
    • Duration: Up to 12 Months
    • Studying in a class environment is a great way to enjoy the benefits of face-to-face education in a way that is far removed from a typical school. You will be learning in an adult environment where you will be respected and nurtured. Attend a class to learn face-to-face with a teacher in one of our learning spaces; such as a classroom, workshop or simulated environments. 
    • Courses may have a combination of online and classroom based learning. Students are expected to undertake additional personal study to complete the course requirements.
    • Contact Australasian College of Technical Education to find out what classes are running near you.
  • Traineeship
    • Duration: Up to 24 Months
    • For this course you must be employed or gaining full time or part time (Min 15 hrs per week) employment to enrol as an apprentice or trainee with Australasian College of Technical Education.
    • If you are in years 10, 11 or 12 you may be able to enrol as a school-based trainee (SAT), please discuss with your schools VET Coordinator.
    • Eligible apprentices and trainees that meet the Queensland state funding requirements will be charged a set fee per nominal hour. These fees are calculated at a regulated rate of $1.60 per nominal hour. Concession rates apply for students who hold a current Health Care Card or who identify as Aboriginal or Torres Strait Islander.
    • Non-funded apprentices and trainees will be charged a fee for service cost as listed below. 
    • Speak to your employer or VET Coordinator about choosing Australasian College of Technical Education as your Supervising Registered Training Organisation (SRTO) or contact one of our friendly training consultants to discuss your training needs further.

STUDY LOCATIONS

  • Milton
  • Mackay
  • Hervey Bay

COURSE OVERVIEW

Get a head start on your career in early childhood education and care with this entry-level course. This qualification is the minimum requirement for early childhood settings in Australia and will set you up with the foundation skills to get ahead.

According to the Australian Government’s Job Outlook service, the child care industry is experiencing very strong growth. Qualified candidates are in high demand in this very large occupation with around 184,000 job openings expected over the next five years.

This course covers a number of core skills, including how to plan, implement and evaluate educational early childhood programs, support health meal times for children and foster individual development. You will also learn how to comply with legal and industry requirements.

Successful completion of this course will allow you to confidently seek employment in a range of entry-level early childhood education and care roles, and equip you to complete further studies in the field.

UNITS & PAYMENT OPTIONS

The successful achievement of this qualification requires you to complete all 18 Units (15 core and 3 elective units). You will also be required to undertake 120 hours of vocational placement in an approved setting. 

CERTIFICATE III IN EARLY CHILDHOOD EDUCATION AND CARE

Course Training Plan

Unit CodeUnit Name
CHCLEG001Work legally and ethically
CHCECE001Develop cultural competence
CHCECE002Ensure the health and safety of children
CHCECE003Provide care for children
CHCECE004Promote and provide healthy food and drinks
CHCECE005Provide care for babies and toddlers
CHCECE007Develop positive and respectful relationships with children
CHCECE009Use an approved learning framework to guide practice
CHCECE010Support the holistic development of children in early childhood
CHCECE011Provide experiences to support children’s play and learning
CHCECE013Use information about children to inform practice
CHCPRT001Identify and respond to children and young people at risk
HLTAID004Provide an emergency first aid response in an education and care setting
HLTWHS001Participate in work health and safety
CHCDIV002Promote Aboriginal and/or Torres Strait Islander cultural safety
CHCDIV001Work with diverse people
BSBWOR301Organise personal work priorities and development
CHCECE021Implement strategies for the inclusion of all children

Available Enrolment Options

Full fee payment of $3,328.00You can Enrol Online now or Contact us for more enrolment options
The Certificate 3 Guarantee program supports eligible individuals to complete their first post-school certificate III qualification and increase their skills to move into employment, re-enter the workforce or advance their career.It also supports Queensland’s Year 12 graduates to transition to employment by providing fee-free training in high priority qualifications.For an overview of what the Certificate 3 Guarantee means, view the Certificate 3 Guarantee student fact sheet (PDF or DOCX)If you have any concerns speak with a representative from Australasian College of Technical Education. Or if you want to quickly check your eligibility visit the Certificate 3 Guarantee websiteThis course may be eligible for this funding. Contact us for more information$40.00 Co-Contribution Fee (Concession)$50.00 Co-Contribution Fee (Non-Concession)
The Queensland User Choice program is a publicly funded contribution towards the total cost of training and assessment for eligible Queensland apprentices and trainees. The user choice program provides apprentices, trainees and their employers the flexibility to select a preferred registered training organisation from a list of pre-qualified suppliers to meet their specific needs. Australasian College of Technical Education is a pre- qualified supplier and can assist you with your inquiries and training needs.Note Whilst the funding is provided by the Queensland Government it does not cover the full cost of the training as RTO’s are required to levy a student contribution fee. If you want more detail, contact Australasian College of Technical Education. You can also check if you are eligible for funding for using the following link Check your eligibility.This course may be eligible for this funding. Contact us for more information

UP FRONT PAYMENT

This is the total amount you need to pay when you enrol. This may be the full fee for the course, or the student contribution amount if you are eligible for a subsidy or concession.  Any upfront fee that exceeds $1500 a payment plan will apply.

PAYMENT PLAN

If you have difficulty paying for the full cost of a course upfront or the course fee is greater than $1500, you may be eligible for a payment plan, which will be negotiated upon enrolment.

For further information relating to Australasian College of Technical Education’s fees and charges and refund policies, please visit our Policies and Procedures page.

IMPORTANT INFORMATION

ENTRY REQUIREMENTS

There are no formal entry requirements for this course.

SELECTION CRITERIA

As part of the selection criteria for this program it is highly recommended that students:

  • are aged 15 years or older by the course commencement date;
  • have successfully completed Year 10 (or equivalent) or are of mature age; and
  • have basic English skills (written and verbal communication).

PLACEMENT

If you are not currently employed or volunteering in industry, during your course you will be required to complete vocational placement so you can start practising your new skills in a real-world environment. You’ll be required to work shifts determined by your placement provider, and these can include early mornings or late nights, any day of the week, including public holidays. Australasian College of Technical Education may be able to assist in arranging suitable placements.

Completing placement is compulsory, and you will be expected to manage family and work commitments in order to complete your shifts. You are required to complete a minimum of 120 hours of placement to satisfy this component of your qualification.

Please note: Prior to placement you will need to:

  • apply for a Blue Card (working with children check)

If you are ineligible from applying for a blue card, you may be disqualified from being eligible to undertake placement and assessment, which would affect your course outcomes. If you think this might impact you, please speak to the relevant Vocational Placement Coordinator for further information.

It is also recommended that all students should undertake screening for vaccination against the following Queensland Health Mandatory vaccination requirements such as:

  • MMR (Measles, Mumps and Rubella)
  • Influenza
  • Varicella zoster virus (chicken pox)
  • Pertussis (whooping cough)
  • Hepatitis B

You will be responsible for any costs associated with meeting these placement requirements, which may include travel and/or accommodation costs as well as an additional cost of approximately $35-$45 for a Criminal History Check.

RESOURCES REQUIRED

It is recommended that you have access to a reliable Internet connection to access learning resources, and a computer with up-to-date software, including Microsoft Office, Adobe Acrobat Reader and Adobe Flash Player. 

ASSESSMENT METHODS

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at Australasian College of Technical Education, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

CREDIT TRANSFERS & PATHWAYS

CREDIT TRANSFER

Australasian College of Technical Education as a Registered Training Organisation recognises the Australian Qualifications Framework qualifications and Statement of Attainments issued by any other Australian Registered Training Organisation.

Students are encouraged to submit any requests for credit from previous studies at the time of enrolment, to ensure they are not enrolling in units they may not need to undertake.  In order to apply for exemption/credit transfer from units completed at another training organisation, you will need to notify Australasian College of Technical Education when you enrol.

You will need to submit your documentary evidence (certified copy of Qualification/Statement of Attainment) to support your request for exemption/credit transfer via mail or email. Requests without documentary evidence will not be processed and will be returned to students. There are no fees attached to Credit Transfers.

RECOGNITION OF PRIOR LEARNING (RPL)

RPL is the acknowledgement of a person’s skills and knowledge acquired through previous training, work or life experience, which may be used to grant status or competency in a subject regardless of how and where they were attained.
This can include skills from:

  • Previous study excluding courses at a VET/TAFE institution, but including courses at school or college, through adult education classes or training programs at work;
  • Work experience (including both work that is paid and unpaid); and/or
  • Life experience (for example leisure pursuits or voluntary work).

RPL is a form of assessment. It is used to determine whether a person has acquired, through formal or informal learning, the skills and experience consistent with the stated competency standards that comprise a qualification. RPL isnot time referenced, so there are no parameters on how or when the skills are acquired. However, the skills that have been acquired through life experience etc., must be current and must match the elements and performance criteria contained in the individual unit.

Students seeking RPL need to indicate this when enrolling, fee’s will apply and will be discussed upon enrolment.

STUDENT SUPPORT SERVICES

Everyone’s journey is different and sometimes you need some extra support. We’re here to help. 

Throughout your training you will have access to support from our student support centre and trainers and assessors.

You will be supported in your learning in the following ways:

  • Answering queries about assignment questions by phone, email or face to face;
  • Explaining assessment processes;
  • Arranging contact with a trainer, via telephone or visit;
  • Monthly status reports keeping you up to date on your progress
  • Making appropriate arrangements for students with disabilities;
  • Organising assignments to be assessed in a timely manner; and
  • Advising students of their results and any further required study or assessment.

Contact our friendly Student Support Services team – 1800 029 466 or via email

HOW TO APPLY

If you have read and understood the student rules, refund policy, understand your fees and payment options, have a Unique Student Identifier (USI) and checked you meet the entry requirements and selection criteria for this course, you’re ready to get started.

 APPLY NOWemail or contact a training consultant on 1800 114 419 to get started!

Disclaimer

All information was accurate at time of publication, however Australasian College of Technical Education’s policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolment numbers. Timetable information is subject to change prior to commencement and/or during the duration of your course.

Why back your future with ACTE

WE KNOW MODERN INDUSTRY

"The team at ACTE know modern industry because that’s where they have come from. Our courses are carefully developed in consultation with industry stakeholders and selected for relevance in the workplace. That means that our learners are trained in areas they need and what employers are looking for".

WE KNOW TRAINING

ACTE trainers know training because they are experts in their field.

With recent industry experience, learners can be assured that ACTE trainers know the course content because they have practiced what they teach.

They’re also a helpful and approachable bunch … so there’s that, too.

WE KNOW MODERN DELIVERY

With exceptional student and industry networks, ACTE shapes the delivery of course work to meet the needs of a modern learner.

That means a modern, approach to student communication and resource access so your coursework is at your fingertips and ready to go when you are.

All nationally recognised qualifications provided by ACTE are listed as such. Look for the:

Nationally Recognised Training logo to see if the course you're considering is a nationally accredited one.

Intake dates are not a restriction at ACTE.

We’ve tailored our course delivery to suit the diverse needs of the modern learner. That means you start studying when you need to.

Detail oriented? So are we. Our comprehensive Course Brochures will help you to make an informed decision about your commitment to backing your future by studying with ACTE.

Find out more

Our student services and individualised approach is what sets us apart as a training provider.

Click here to see our Student Information page

Click here to Contact Us

WANT TO KNOW MORE?

If you’re ready to take the next step of your learning journey or need to know more information before you proceed. Please contact us for a personalised approach to your enquiry.

07 3463 1333

For all enquiries

enquiries@acte.com.au

For all email general enquiries

Contact Us